top of page
Regularly test your moulds to keep a record of health, and monitor flow rate for a detailed record of mould permeability
It's important to regularly test moulds and keep a record of their health over time.

To achieve this, PCL has created the Flow Meter.


What the Flow Meter does is test off the casting machine by feeding air through a mould in a set sequence of pressures and times. It then records the flow rate of the air through the mould for the duration of the test.


All the data is stored in the device and can be copied to a memory stick and/or connected to a factory network for storage on the factory network system.


The airflow system comprises of a water separator, sub-micron filter, proportional regulator and flow meter. The system is portable and simply requires a 110v electrical connection and an air supply.


It will run pre-set test programs and/or independently configured programs. These programs control the pressure of air passing through a mould-release air system.

As the air flows through the mould, the system logs the flow. Each test is saved as a separate CSV file which has all the test data and logged pressure and flow values. These can then be viewed and assessed using an Excel spreadsheet


The average values for the flows at different pressures are also stored in a separate file enabling easy comparison of mould performance.

Our high-pressure casting machines


Our two-part mould casting machine range produces a full range of sanitaryware pieces. The PC570 and PC120 multi mould overhead beam systems can cast items in both vitreous and fine fireclay ranging from small wash basins to large shower trays.


PCL has several bowl machines capable of producing the full range of WC bowls. Our PCB multi mould system offers the capability of producing 8 bowls in one cycle. Our revolutionary RotoBowl is a modular system and can produce both open and stuck on rim bowls on the same cell.


PCL can supply a number of machine upgrades to our casting systems to increase their flexibility and further improve productivity and ease of use.


In addition to our standard range of machines PCL can design and build a machine to suit your specific casting requirements to an agreed specification.

We want to hear from you

Contact us for more information

Contact Details:
PCL Ceramics Ltd
Estuary Road
King's Lynn
PE30 2HS
United Kingdom

Thanks for submitting!

+44 (0) 1553 622000

bottom of page