PCB5/70 Pressure Casting Machine

This PCB5/70 bowl machine offers an economic pressure casting system for WC bowls. A novel mould design allows up to eight bowl moulds to be mounted onto a single machine. This ensures that all

of the benefits of pressure casting are applied giving an economical solution to high volume bowl production whilst still providing sufficient flexibility for low volume products.

Machine Typical Configuration and Output Table

Benefits of the PCB5/70 WC Bowl Machine:

  • Delivers significant capital cost savings per piece produced compared to other pressure cast bowl systems
  • Can produce over 500 pieces per day with a single operator per shift
  • Allows multiple styles to be produced on the same machine
  • Utilises our proven resin mould technology and construction technique
  • Can produce a wide range of styles, including open rim, stuck on box rim and back to wall styles
  • The PCB5/70 is supplied as a complete prefabricated unit with mould support and alignment system, hydraulic ram and power pack, heated slip supply, chemical injection systems, control unit and robotic demoulding system

Typical casting outputs for PCB5/70:

  • Four-part open rim. 159,600 pieces per year, eight pieces per cycle
  • Five-part open rim. 159,600 pieces per year, eight pieces per cycle
  • Three-part open rim. 159,600 pieces per year, eight pieces per cycle


The RotoBowl is a revolutionary machine allowing a full range of complex bowls to be cast on a single casting system. Rotation of the mould during the casting process improves both slip drainage and slip flow in the mould. The RotoBowl can cast both open and stuck on rim bowls.

High Pressure Casting Machines


Our two-part mould casting machine range produces a full range of sanitaryware pieces. The PC5/70 and PC120 multi mould overhead beam systems can cast items in both vitreous and fine fireclay ranging from small wash basins to large shower trays.


PCL can supply a number of machine upgrades to our casting systems to increase their flexibility and further improve productivity and ease of use.


In addition to our standard range of machines PCL can design and build a machine to suit your specific casting requirements to an greed specification.

Contact Details

PCL Ceramics Ltd
Estuary Road
King's Lynn
PE30 2HS
United Kingdom

T. +44 (0) 1553 622000

F. +44 (0) 1553 622020
E. sales@pclceramics.com

Terms and Conditions


Want us to call or email you back?